SCM Group DMC SD30-RCS 110 Double Head 43" Wide Belt

SCM Group DMC SD30-RCS 110 Double Head 43" Wide Belt

$34,090 (USD)

Tracy, CA

orCall 209 832-0100

Description

Description

The DMC SD 30 RCS 110 is ideal for the craftsmen and the small woodworking companies. Solid wood calibrating and sanding and veneered panel sanding operations (also with honey-comb support), and also for any other sanding requirements. The availability of the electronic sectional pad on this model also provides the sanding operations on honey-comb veneered panels.

Features

  • “Mesar” sectional pad: The best finish with any material. Higher quality results due to the special shape of the sectors that allows the operator to intervene “softly” but also in an “aggressive” way, simply by varying the working pressure. The setting of the pad position and the possibility of using foils of different thickness increases its versality.
  • “Logic SC” electronic programmer: Easily avoid mistakes. Simple and intuitive, allowing the operator to set all processing parameters in sequence and then launch them with the touch of a button. The possibility to store various work programs to retrieve the machine settings most commonly used makes it ideal.
  • Diamond-shaped belt: No slipping of the work pieces. The special geometry of the diamond-shaped profile of the transport belt provides the best traction surface for the work piece and with the increased support area also ensures maximum stability.
  • Led indicator for panel introduction: Simple and intuitive, communicating to the operator where and when the panel has to be introduced into the machine and optimizing the standard wear of the sanding belt; this ensures a better-quality finish and reduced machine costs.
  • RCS Version: Higher flexibility and productivity for a top-quality finishing in a single passage. Ideal for all “typical” requirements of woodworking and veneering companies: solid wood calibrating/sanding and sanding veneered panels (internal doors, windows and customized furniture). The combination of using only the roller groups gives optimum results when sanding against the grain.

General Features

  • Rubber coated pressing rollers before and after working unit
  • 1 HP Inverter variable speed feed unit. Feed speeds set at 10 to 60 feet per minute
  • Y-Delta two-stage reduced voltage starter on main motor
  • 2 roller Infeed and outfeed table extensions
  • Automatic Electronic Table Positioning Device
  • Adjustable sanding drum and pad position for micro precision adjustment
  • Electronic digital thickness readout of work table position
  • Powered table lifting by means of four heavy duty motor and lifting columns double fastened at both top and bottom of the lifting columns to provide exceptional table stability
  • Electronic tracking of abrasive belt
  • Automatic feed mat tracking
  • Pneumatic belt tensioning with center fulcrum to compensate for tapering of abrasive belt
  • Front and rear emergency stop buttons
  • Automatic emergency stop of machine for:
  • sanding belt breaking, tensioning, over tracking
  • opening of the access door to the operating groups
  • absence of compressed air
  • overload on main motors
  • Amperage meter for main motors allows maximum utilization of available horsepower
  • Main disconnect switch with the ability to be locked out by padlock
  • In feed flexible steel hold down, and anti-kick back plate
  • 50 shore, negative profile (waffle style) rubber feed mat
  • LOGIC 50 K Electronic Programmer for timing/anti-dubbing of the pad

Specifications

  • 1st Working Unit
  • Motor Hp: 30 HP (shared)
  • Motor Type: Single Speed
  • Abrasive Belt Speed: 18 mps
  • Drum Size: 120 mm (4.75”)
  • Drum Type: Steel Calibrating
  • Abrasive Belt Length: 75”
  • 2nd Working Unit
  • Motor Hp: 30 HP (shared)
  • Motor Type: Single Speed
  • Abrasive Belt Speed: 18 mps
  • Drum Size: 120 mm (4.75”)
  • Drum Type: 45 Sh Rubber
  • Platen Size: 50 mm (2”)
  • Platens Included: Two
  • Abrasive Belt Length: 75”
  • Other Specs
  • Working Width: 1,100 mm (43”)
  • Number of Heads Available: 2
  • Feed Motor: 1 HP Inverter
  • Maximum Work piece Thickness: 170 mm (6.69”)
  • Minimum Work piece Length: 12.5 inches
  • Abrasive Belt Size: 43” x 75”
  • Compressed Air Requirements: 6 Bar (88 PSI)
  • Dust Outlets: 2 outlets @ 140mm (5.5”)
  • Exhaust Requirements: 1,800 CFM
  • Power Requirements: 87 amps @ 230 Volts/3 phase


Specifications

ManufacturerSCM Group
ModelDMC SD30-RCS 110
ConditionNew