Razor Gage Cyclone 600 Up Cut Saw

The RazorGage Cyclone 600 Upcut Saw delivers sharp cuts 20 inches wide with virtually no tearout or tool marks

And unlike most upcut saws, the RazorGage Cyclone 600 UpCut, is easy to cycle without powering up the motor, or compromising the integrity of the blade and spindle. And the Cyclone 600 won’t cycle without motor power.

Specifications:

• Motor Specs: 7.5 hp (enclosed fan cooled)available in 208-230-460Vac 3-phase
• Power Source: 230 VAC, 3 phase, 60 Amps - 460 VAC, 3 phase, 30 Amps
• Exhaust Port: Two 4" diameter (102 mm) requiring 600 cfm - (17 m3) minimum for dry light materials. Other material may need higher velocity/pressure
• Compressed Air: Requires 80 psi (5.5 bar) at 5 cfm (0.14 m3) air filtered to 2.5 microns (oil and moisture free). Use industrial air dryer, rated for cfm (CM) flow. No lubrication required for air components. Air must be lubricant free.
• Motor RPM: 3500
• Arbor: 1.0" (25mm)
• 500mm Blade for Wood:- 500mm x 120T x 1” Bore x 23°ATB/5°ASF x Plate .128 x Kerf .172
• 500mm Blade for Aluminum: O/D 500mm or 19.68” x Kerf 3.5mm or .137” x Plate 3.0mm or .118” x Bore 25.4mm or 1.00” x Teeth 140 D Type Tip - Grade Sash Pro X Expansion Slots Five.
• 24" Blade for Wood: 24" Dia. x 144T x 1" Bore x 23°ATB/5°ASF x Hook 22° Plate.138 x Kerf.186
• 24" Blade for Aluminum: 24" Dia. x 200 Teeth x 1" Bore x TCG x Hook 6° Plate.138 x Kerf.174
• Shipping Weight: 975 lb
• Shipping Dimensions: 48" wide x 48" deep x 64" tall